{{ variable.name }}

TS-2255 angle valve with hot-forged brass body, chrome plated ball and plastic handle.
The TS-2255 is a compact brass angle valve built for washing machine inlets, sanitary ware and other tight plumbing connections. A hot-forged normal brass body houses a machined, chrome plated brass ball, and the plastic handle turns a quarter turn from fully open to fully closed. Units are pressure tested at 116 psi (8 bar) and are rated for water, oil and gas service between 0 ℃ and 120 ℃.
| Parameter | Value |
|---|---|
| Model | TS-2255 |
| Product type | Brass angle valve with plastic handle, for washing machine |
| Body material | Hot-forged normal brass (lead-free brass option available) |
| Ball | Machined, chrome plated brass |
| Stem | Brass or POM (polyoxymethylene) |
| Handle | Plastic (brass handle option available) |
| Seats and seals | PTFE or NBR |
| Surface treatment | Chrome plated |
| Test pressure | 116 psi (8 bar) |
| Working temperature | 0 ℃ ≤ t ≤ 120 ℃ |
| Suitable media | Water, oil, gas |
| Connection / installation | Threaded, horizontal or vertical installation |
| Factory management | ISO 9001:2015 and ISO 14001:2015 (TÜV NORD CERT) |
The TS-2255 is configured to your drawing: handle in plastic or brass, stem in brass or POM, body in normal hot-forged brass or lead-free brass, and seats in PTFE or NBR depending on the media. Thread sizes are confirmed against your specification at quotation, because the valve is supplied to project requirements rather than to a fixed catalogue size list.
The body is hot forged in normal brass, then machined and chrome plated. Inside, a machined chrome plated brass ball seats against PTFE or NBR seats, and the stem — brass or POM — links the ball to the plastic handle. The angle body directs flow through 90 degrees, which is what allows the outlet to sit close to a machine or fixture without a separate elbow.
Washing machine inlet connections, household water supply lines, sanitary ware and plumbing installations in public buildings. Within the stated pressure and temperature limits the same valve is also used for oil and gas service; gas installations may require local approval, which is checked per project.
OEM/ODM supply covers custom branding, packaging and specifications. TOSVAL was founded in 1999 in Yuhuan, Zhejiang, exports 99% of output to Europe, South America and the Middle East, and holds ISO 9001:2015 and ISO 14001:2015 certification from TÜV NORD CERT for the design, development and production of copper valves and brass fittings. Documentation packages for water and gas utility tenders are prepared alongside the shipment. WRAS, EN 331:2015, EN 13828:2003 and ACS approvals are held for listed ball valve families, so the applicable certificate for your TS-2255 configuration is confirmed in writing before the order is placed.
What pressure is the TS-2255 tested at?
Test pressure is 116 psi, equivalent to 8 bar.
Which media and temperatures are allowed?
Water, oil and gas, with a working temperature range of 0 ℃ to 120 ℃.
Can the valve be mounted vertically?
Yes. The threaded connection allows horizontal or vertical installation.
Is a lead-free brass body available?
Yes, lead-free brass is offered as an option in place of normal hot-forged brass.
Do you supply OEM branding and packaging?
Yes, custom branding, packaging and specifications are part of the OEM service.
Which certificates apply to this valve?
The factory operates ISO 9001:2015 and ISO 14001:2015 systems. Product approvals such as WRAS, EN 331, EN 13828 and ACS are held for listed ball valve families, so the specific certificate for your configuration is confirmed per order.
Send the thread size, handle and body material you need, together with annual volume and packaging requirements, and the technical team will reply with the matching configuration. Email: tosval@tosval.com · Tel: +86 576-87308558 · WhatsApp: +86 139-0676-4498 · No.16 Fengyu West Rd, Economic Development Zone, Yuhuan, Zhejiang, China.